Wifi Video Doorbell 0-35 Degree Swivel Tilting Mount - Generic V5 Many Brands

+5

+4

+3

+2

Wifi Video Doorbell 0-35 Degree Swivel Tilting Mount - Generic V5 Many Brands

Name: Wifi Video Doorbell 0-35 Degree Swivel Tilting Mount - Generic V5 Many Brands
Brand: PerfectBuzzer
SKU: SW35V5
Price: 39.9 USD
Availability: InStock

Home/Store/All Doorbell Mounts by Brand

$39.90

0-35° Adjustable

This mount is mainly used when doorbell is on same wall as the door.

Color

Please choose

Narrow Baseplates

Please choose

Larger BasePlates

Please choose

Gang Box Adapters

Please choose

Base Hole Spacing Mods

Please choose

Custom Services

Please choose

Express Service

Please choose

In stock

Save this product for later

Wifi Video Doorbell 0-35 Degree Swivel Tilting Mount - Generic V5 Many Brands

Home/Store/All Doorbell Mounts by Brand

Product Details

Brand: PerfectBuzzer

Weight: 4.00 oz

V5 Video DOORBELL (Generic Brand)

0-35 degree swivel adjustable mount.

Rotate, Swivel, and adjust the doorbell up to 90 degrees in any direction. Screws are included to mount the doorbell to the bracket. Use your own screws for your wall installation. A center hole is included in the mount to route the wires. The range of motion is from aproximately 15 - 90 degrees.

BEFORE PURCHASE - PLEASE EMAIL (Shop@perfectbuzzer.com), TEXT 318-759-7425, Or Message Me (Messenger Button on Bottom Right of Page) with a picture of where you want to install this to be sure you are purchasing the correct parts and for the correct doorbell.

This mount is mainly used for trim on the side of the door.

Doorbell not included

Fits This Doorbell

The swiveling mount can rotate in just about any direction from 15 to 90 degrees. Really it can rotate 15-90 then 105 to 180. It can look left or right, tilt up and down.

PLEASE email me a picture before purchase to make sure you are ordering the correct doorbell type and if a backplate is recommended. (Take picture of doorbell box if not installed, and take picture of the current doorbell from the position of where you want the doorbell to view)

Mount can be installed horizontally as well as vertically to fit in very narrow situations.

Everything is printed with high quality PETG

Swivel has a hole to allow wires to pass through the back. Screws are included to mount and secure the perfect angle so It doesn’t move when bell is pressed.

Backplates are optional. Additional colors are optional. Black is the standard color. Backplates are an inverted box to allow for wires to pass or to cover large holes left by old doorbell. There is room for small wire nuts in the box.

Request a customization if you want a different color than black. White is $2 more, other colors $3 more, and stainable wood $10 more.

Small Backplate is 2.5in x 4in

Medium Bakplate 3 x 4.5

Large Backplate 3.5 x 5

XL Backplate is 4.25 x 6.25

Narrow Backplate is 3/4 in wide at bottom and transitions to 1.8in wide. .43in tall. Can custom make taller

Tall Narrow Backplate gives 1in of sidewall clearance. Before the translation to 1.8in wide.

Offset Backplate - backplate is 3/4in wide at bottom and offset to be flush on one side.

Also Can customize Base- To Move bolt holes to your dimensions - message me for info

Have adapter plate for 2-3/16 Hole Spacing in both doorbell base size (7/8" x 2-7/8")

or Standard base size with 2-3/16 Hole spacing

Message me for all your 3d printing needs.

****The 90 degrees is relative, and it might be slightly less, but this listing provides a doorbell bracket that can work in the 90 degree position relative to the wall. Actual angle can vary depending on the position of the bracket .

****While 3D printing provides really good production quality parts, there are often imperfections that may be found on the prints. These do not impair the function and rarely affect the aesthetics. But if your not happy with the quality, please text, email, or message me before leaving a review.