Doorbell Brick Extension for Narrow Trim Doorbell Locations - Multiple Extension Lengths Available

This is a narrow 3/4in wide Base Bracket that Extends Past the Brick and Places the doorbell offset from the trim over the brick.

The extension can go multiple lengths, please be sure to be exact in the measurement it is ok to manor slightly larger You may need to shim behind the doorbell if too far out. The first picture shows one that about 3in, the default is 1in, so if you need larger please choose the exact distance you need.

There is one hole behind the bracket to allow one screw in the brick if you needed to secure it better It is recommended to apply this screw for any brick mount more than 3inches

Measure the distance from the trim where the base would sit to the brick. That is the extension length you need to purchase.

Angle adapters are available with this model under customiZation. Or an adjustable mount can be added to the end. Send me a message to get a quote on the customization.

The offset is about 1/4" From the center of the screw holes over the brick for the center of the doorbell. Depending on the width of your doorbell it can move over the edge about 2-1/2" over the brick.

Item is 3D printed and made from PETG plastic material.