Google Wireless Doorbell Fixed Mount Slim INSTALL ANYWHERE Siding/ Trim- Fits exactly where old doorbell fit.-NO NEW HOLES - Angle Adjustment Available from 0-90 Degree Horizontal & 0-20 Degree Vertic

This is for the Google Nest Doorbell - Wired Only (picture shown is for generic doorbell and will be made to fit the doorbell in the title)

Fixed Mount with common dimensions of a doorbell - aprox 3/4in wide x 2.5 in tall with 2in hole spacing as the standard small Mount. CANNOT use wedge with this mount. If you need an angle adjustment I have different listings that take the place of wedges and angle changes.

Message me at 318-447-7345 to help with your installation.

HORZ Angle Adjustment - RIGHT means the tilt of the doorbell when Looking at the doorbell (NOT FROM THE DOORBELL VIDEO-it is opposite) If your doorbell is on the left of the door, you want the doorbell to look right. Doorbell on left of door, you want the doorbell to look left. For perpendicular - 90 degrees - then it is the direction you want it to point when looking at the doorbell.

If you want more than one angle adjustment, choose the option to add additional angle adjustment brackets. This is in case you cant determine the angle you need and you want to have a choice. Leave comment at checkout for the angles desired. ie. Right 15, Right 30, and Right 45 degrees all in 10 degree vertical for the addon of 3 additional angle adjustment pieces.

Doorbell Not Included. - Has hole through center to run the wires.

Fixed Mount with common dimensions of a doorbell - aprox 3/4in wide x 2.5 in tall with 2in hole spacing as the standard small Mount. CANNOT use wedge with this mount. If you need an angle adjustment I have different listings that take the place of wedges and angle changes.

Screws are included to mount the doorbell to the bracket. I also include the screws to mount the bracket to the door with #4 x 1-1/2in screws (these are small dimeter screws- with heads that fit into the screw holes for a tight fit and you may need anchors for them which I do not provide).

Doorbell not included

The bracket will come in 2 pieces. The base will have to be installed to the wall first, then the top piece will install after the base is installed. Any questions please message me here with the messenger link or text me at 318-447-7345.

For LAP SIDING ANGLES: 10 degrees is most common and fixes most issues. These angle recommendations will give the adjustment to make the doorbell close to vertical like a typical installation. Choose a larger angle if you want more tilt down to see more of the floor.

Recordation's based on siding size and thickness of siding panel:

For Siding with 1/4 in Horz Overlap - Choose 5 Degree

For Siding with 1/2in Horz Overlap

4" Siding -8 Degree

6" Siding - 5 Degree

8 or Larger Siding - 5 Degree

For Siding with 3/4 in Horz Overlap

4" Siding -10 Degree

6" Siding - 8 Degree

8 or Larger Siding - 5 Degree

For Siding with 1 in Horz Overlap

4" Siding -15 Degree

6" Siding - 10 Degree

8 or Larger Siding - 8Degree

Ring Recommends having the doorbell at 48 inches, if your doorbell is higher choose a larger angle, if it is lower, choose a smaller angle. If really low (less than 30 inches) you will need to tilt up.