This is a narrow 3/4in wide Base Bracket that Extends Past the Brick and Places the doorbell offset from the trim over the brick.
The extension can go multiple lengths, please be sure to be exact in the measurement it is ok to manor slightly larger You may need to shim behind the doorbell if too far out. The first picture shows one that about 3in, the default is 1in, so if you need larger please choose the exact distance you need.
There is one hole behind the bracket to allow one screw in the brick if you needed to secure it better It is recommended to apply this screw for any brick mount more than 3inches
Measure the distance from the trim where the base would sit to the brick. That is the extension length you need to purchase.
Angle adapters are available with this model under customiZation. Or an adjustable mount can be added to the end. Send me a message to get a quote on the customization.
The offset is about 1/4" From the center of the screw holes over the brick for the center of the doorbell. Depending on the width of your doorbell it can move over the edge about 2-1/2" over the brick.
Item is 3D printed and made from PETG plastic material.
I have a Blink doorbell to install and I need a hole in the extension to pass wires through it. Can you do this? Thank you.
Anik R.
Yes, all my mounts allow for wires to pass on the inside.
Ricky ..
from PerfectBuzzer
which one do you recommend for the Doorbell Camera Wireless, aosu 5MP Ultra HD.
John B.
Yes, I can mount that doorbell to the brick extension
Ricky ..
from PerfectBuzzer
How does the ring door bell connect to the mount? Do u have to by a separate plate
Don
No you do not have to buy anything extra. I include all the hardware needed to mount the doorbell to my mount.
Ricky ..
from PerfectBuzzer
We have standard brick with the regular doorbell mounted in the center of the brick mold (trim). I’m a construction guy and I can’t discern what/which offset, base, etc that will work for our application (ring 4). I don’t know if I need the 1-1/2” offset or what…
Dw
The standard offset works fine. For the ring 4 it is the widest doorbell. I made the offset greater for the ring 4 to allow the side toward the door to be flush with the side of the bracket.
Ricky ..
from PerfectBuzzer
will this work for the ring video doorbell 2nd generation
Mario
Yes, just choose the Gen 2 from the doorbell model list.
I used this for a Google Nest Ring Doorbell, for a driveway gate. I needed a mount with a good turn angle to capture the entire driveway and also cars driving by, as we have had packages stolen. This product is great. It did the job.
My front door was at a 45 degree angle to my deck stairs and I couldn’t find the right mount until I found Perfect Buzzer. They had mounts for all types of doorbell cameras and offered alot of options so I had questions and when I reached out they answered quickly and helped me figure out exactly what I needed. The installation was easy and I am extremely pleased that I found the Perfect Buzzer.
Great product! So happy I found it. Tiny issue if you use the angle plate on the eufy e340 doorbell, you’ll need longer screws to attach the doorbell plate.
Doorbell bracket for our Nest Doorbell arrived quickly and fits great. We had a horizontal standard wired bell on the wall adjacent to the front door. This bracket allows to articulate the new bell cam in front of the door and down the patio and path. IT WORKS GREAT!!!
Awesome product. Exactly what I was looking for. Fast shipping and easy to install.
BB
Bartlomiej B.
This extender works perfectly for me in my new condo. It shows everything I need, even with the stone wall blocking some of the view. (All I need is to the end of the sidewalk and coming into that.) Very happy. Great service with responsive text messaging. Recommend Hollie!
+ 2
JB
Jinks B.
I needed a 90 degree mount for my Ring Pro 2 Door Bell. All of the other ones I found online looked cheap and flimsy. This one works great and I was able to use Ring Doorbell angle bracket with this mount to give me my desired viewing angle. I would highly recommend this product.
B
Bp
Really helpful base! Exactly what it was needed to rotate 70 degrees the angle of my Logitech Circle View Doorbell. Didn’t know which plate I should buy so texted Rick a couple of pictures and he oriented me. Thanks!
J
Josh
Absolutely perfect. I was removing 2 older Ring Doorbell Pro's, so I ordered a customized a mounting plate + doorbell mount combo (so that I could just use the existing holes and wall anchors that were already in the stucco.) I can't believe this can be custom manufactured so perfectly, and install so easily, and adjust in every direction with plenty of wall-clearance. These (I purchased two) were well worth the price. They both installed really easily with the included screws, and they both look great. Camera angles are now locked in, and perfect. A really great product.
MM
Michael M.
Amazing store! They're filling a valuable niche product that the manufacturers' either didn't think of or didn't want to take the time to solve. This place has everything and the employees are super helpful! They walked me step-by-step through the process for my Amazon Ring Doorbell. Super patient with me. Also, they sell doorbell wire extensions--so remember to place it with your order because you might need it!
AC
Alex C.
Ricky was great in helping me select the correct mount for my new Ring 3 doorbell. The fixed mount worked great. We have an older home with a very narrow mounting space. This mount fit perfectly.
NP
Nancy P.
I found this product on Etsy. I find it unbelievable that Ring and the other smart doorbell makers don't have their own products to help people with more difficult installations for whatever reason. But, these products perfectly fit the bill! I was a little confused about what I needed and all communication between myself and Ricky was super quick and super helpful. Once I got the doorbell mount it fit absolutely perfectly and looks great! If you need one of these buy them here. You will not be disappointed!
TR
Troy R.
This what’s EXACTLY what I had for a design imagined in my head when I saw our original doorbell and wanted to put up our ring, couldn’t find anything like it anywhere! Thank you so much for making these, it’s PERFECT!!! Will recommend to anyone in need!!
JP
Jarod P.
This is what you need! I was able to get this extension mount to fit my brick entry perfectly for my ring 3+. My door jam was entirely too narrow for this specific model and PerfectBuzzer was the perfect solution!
I used this for a Google Nest Ring Doorbell, for a driveway gate. I needed a mount with a good turn angle to capture the entire driveway and also cars driving by, as we have had packages stolen. This product is great. It did the job.
My front door was at a 45 degree angle to my deck stairs and I couldn’t find the right mount until I found Perfect Buzzer. They had mounts for all types of doorbell cameras and offered alot of options so I had questions and when I reached out they answered quickly and helped me figure out exactly what I needed. The installation was easy and I am extremely pleased that I found the Perfect Buzzer.
Great product! So happy I found it. Tiny issue if you use the angle plate on the eufy e340 doorbell, you’ll need longer screws to attach the doorbell plate.
Doorbell bracket for our Nest Doorbell arrived quickly and fits great. We had a horizontal standard wired bell on the wall adjacent to the front door. This bracket allows to articulate the new bell cam in front of the door and down the patio and path. IT WORKS GREAT!!!
The Product Details state "Only fits Eufy Doorbells (except Dual Camera Models)", however the selectable "Doorbell Version" list includes a "Dual Camera Wired Version" option. Can you provide clarity as to whether the mount supports the Eufy wired S330?
Bryan
I made an adapter that can fit both. Eufy has too many models to have one for each.
The swivel mount at 90 degrees is from 1/4in to 3/4in from the wall depending on the width of the doorbell. The 0-35 degree mount is 1.5inches when at 0 degrees.