This is a logitech view video doorbell 90 degree swivel mount.
Rotate, Swivel, and adjust the doorbell up to 90 degrees in any direction. Screws are included to mount the doorbell to the bracket. Use your own screws for your wall installation. A center hole is included in the mount to route the wires.
This mount is mainly used for perpendicular installation where the doorbell is on a side wall next to the door.
I have not mounted it yet but it looks good, looks sturdy, and delivery was good
PM
Phill M.Verified buyer
The mount is really well built, however the screw holes for mounting to the wall are the incorrect distance, so I am only able to screw in the top leaving it a little less secure.
DS
Douglas S.Verified buyer
That is a custom option to match the screw holes in the wall. I can exchange the item if you wish to customize for your screw holes in your wall.
Ricky ..
from PerfectBuzzer
Worked as advertised and Ricky shipped quicker than expected. All in all I am very happy.
MH
Mark H.Verified buyer
Exactly what I needed. Item matched description perfectly and installation was a breeze. Product was shipped earlier than original date which was a bonus.
HS
Hamza S.Verified buyer
Thanks for your purchase. Thanks for the nice review.
Ricky ..
from PerfectBuzzer
I received it a week or two ago but didn’t have a chance to attach it until today. Set up was not bad, and it seems to be secure. I was skeptical at first if it would be sturdy when pressed but it is pretty secure with the screw holding the swivel in place. Also received great customer service. I originally was going to get one that did not swivel, but I’m glad I did in the end. Really good range of motion.
JM
Joey M.Verified buyer
Thanks for the great review. I think a lot of people have the same skepticism as you had. I am hoping by providing prompt customer service and quality products, I can help alleviate those apprehensions.
Exactly what the world is looking for if you want to install a newly redesigned Ring floodlight came to an electrical box mounted under the sauphet of a house roof.
Very fast turn around time, fast shipping, however the mount didn't fit perfectly. I understand its 3D printed, but we had to secure the doorbell camera with double sided tape as well to make sure it didn't slip off. I did confirm before hand of the exact doorbell camera to make sure the mount worked, but it is serving its purpose Only reason its a 4 out of 5 instead :) Will shop here again!
Perfect customizable mount for my Ring Pro Doorbell. I wanted to use my existing doorbell wires, but the exterior trim that framed my doorway entrance where the doorbell was previously mounted, had a very narrow (3/4") flat-spot, so the mount that came with my Ring Pro doorbell, was too wide and wouldn't mount flat... Perfect Buzzer made me a perfect fixed mount that attached perfectly to the Ring Pro and then to the narrow moulding on my house. Perfect Buzzer was even able to angle it 7.5 degrees to the left, with only a 1/4" extension from the building. Excellent communication with customer service via text with any questions that I had too!
Owner was very easy to work with - was able to talk by phone and text to meet our needs - perfect customer service. The mount was super easy to install and is the perfect solution to our sideways doorbell. Door clears the doorbell easily. Highly recommend this company!
Awesome product. Exactly what I was looking for. Fast shipping and easy to install.
BB
Bartlomiej B.
This extender works perfectly for me in my new condo. It shows everything I need, even with the stone wall blocking some of the view. (All I need is to the end of the sidewalk and coming into that.) Very happy. Great service with responsive text messaging. Recommend Hollie!
+ 2
JB
Jinks B.
I needed a 90 degree mount for my Ring Pro 2 Door Bell. All of the other ones I found online looked cheap and flimsy. This one works great and I was able to use Ring Doorbell angle bracket with this mount to give me my desired viewing angle. I would highly recommend this product.
B
Bp
Really helpful base! Exactly what it was needed to rotate 70 degrees the angle of my Logitech Circle View Doorbell. Didn’t know which plate I should buy so texted Rick a couple of pictures and he oriented me. Thanks!
J
Josh
Absolutely perfect. I was removing 2 older Ring Doorbell Pro's, so I ordered a customized a mounting plate + doorbell mount combo (so that I could just use the existing holes and wall anchors that were already in the stucco.) I can't believe this can be custom manufactured so perfectly, and install so easily, and adjust in every direction with plenty of wall-clearance. These (I purchased two) were well worth the price. They both installed really easily with the included screws, and they both look great. Camera angles are now locked in, and perfect. A really great product.
MM
Michael M.
Amazing store! They're filling a valuable niche product that the manufacturers' either didn't think of or didn't want to take the time to solve. This place has everything and the employees are super helpful! They walked me step-by-step through the process for my Amazon Ring Doorbell. Super patient with me. Also, they sell doorbell wire extensions--so remember to place it with your order because you might need it!
AC
Alex C.
Ricky was great in helping me select the correct mount for my new Ring 3 doorbell. The fixed mount worked great. We have an older home with a very narrow mounting space. This mount fit perfectly.
NP
Nancy P.
I found this product on Etsy. I find it unbelievable that Ring and the other smart doorbell makers don't have their own products to help people with more difficult installations for whatever reason. But, these products perfectly fit the bill! I was a little confused about what I needed and all communication between myself and Ricky was super quick and super helpful. Once I got the doorbell mount it fit absolutely perfectly and looks great! If you need one of these buy them here. You will not be disappointed!
TR
Troy R.
This what’s EXACTLY what I had for a design imagined in my head when I saw our original doorbell and wanted to put up our ring, couldn’t find anything like it anywhere! Thank you so much for making these, it’s PERFECT!!! Will recommend to anyone in need!!
JP
Jarod P.
This is what you need! I was able to get this extension mount to fit my brick entry perfectly for my ring 3+. My door jam was entirely too narrow for this specific model and PerfectBuzzer was the perfect solution!
Exactly what the world is looking for if you want to install a newly redesigned Ring floodlight came to an electrical box mounted under the sauphet of a house roof.
Very fast turn around time, fast shipping, however the mount didn't fit perfectly. I understand its 3D printed, but we had to secure the doorbell camera with double sided tape as well to make sure it didn't slip off. I did confirm before hand of the exact doorbell camera to make sure the mount worked, but it is serving its purpose Only reason its a 4 out of 5 instead :) Will shop here again!
Perfect customizable mount for my Ring Pro Doorbell. I wanted to use my existing doorbell wires, but the exterior trim that framed my doorway entrance where the doorbell was previously mounted, had a very narrow (3/4") flat-spot, so the mount that came with my Ring Pro doorbell, was too wide and wouldn't mount flat... Perfect Buzzer made me a perfect fixed mount that attached perfectly to the Ring Pro and then to the narrow moulding on my house. Perfect Buzzer was even able to angle it 7.5 degrees to the left, with only a 1/4" extension from the building. Excellent communication with customer service via text with any questions that I had too!
Owner was very easy to work with - was able to talk by phone and text to meet our needs - perfect customer service. The mount was super easy to install and is the perfect solution to our sideways doorbell. Door clears the doorbell easily. Highly recommend this company!
The Product Details state "Only fits Eufy Doorbells (except Dual Camera Models)", however the selectable "Doorbell Version" list includes a "Dual Camera Wired Version" option. Can you provide clarity as to whether the mount supports the Eufy wired S330?
Bryan
I made an adapter that can fit both. Eufy has too many models to have one for each.
The swivel mount at 90 degrees is from 1/4in to 3/4in from the wall depending on the width of the doorbell. The 0-35 degree mount is 1.5inches when at 0 degrees.
That is a custom option to match the screw holes in the wall. I can exchange the item if you wish to customize for your screw holes in your wall.