This swivel doorbell mount is for the Ring Video Doorbell 2020 release which is the $100 doorbell by Ring that has an integrated battery ( non removable). Does not fit any other ring doorbell
Swivel Bracket can rotate 0-90 degrees in any direction.
Bracket is screwed into the ball mount, and can be rotated to view ANY angle.
Use the link below to see the Doorbell this Mount fits. Also if you need to purchase one, use this link please.
Had a mix up with the first shipment but called immediately and the proper ring mount was sent. When the 90 degree swivel mount arrived it took about 30-45 minutes to install. I had to deal with short wires otherwise it probably only would have e been a 15-20 minute install. Product works as advertised. Very thankful for the polite and fast customer service owner. You rock!
LL
Leonard L.Verified buyer
Just as described with fast order processing to shipping, good quality product, access to seller if there should be questions/ concerns.
CS
Chandra S.Verified buyer
Worked as advertised.
SD
Stephen D.Verified buyer
This swivel mount is perfect for the Gen 2 Ring video doorbell. And I called the perfect buzzer phone number on the night before Thanksgiving at 5:30PM, and the young man answered the phone and walked me thru my issue with 100% satisfaction!! That is OUTSTANDING SERVICE. Thank you!
TG
Timothy G.Verified buyer
Lol. I’m not young but thanks for the kind words. I try to help every customer get exactly what they need.
Exactly what the world is looking for if you want to install a newly redesigned Ring floodlight came to an electrical box mounted under the sauphet of a house roof.
Very fast turn around time, fast shipping, however the mount didn't fit perfectly. I understand its 3D printed, but we had to secure the doorbell camera with double sided tape as well to make sure it didn't slip off. I did confirm before hand of the exact doorbell camera to make sure the mount worked, but it is serving its purpose Only reason its a 4 out of 5 instead :) Will shop here again!
Perfect customizable mount for my Ring Pro Doorbell. I wanted to use my existing doorbell wires, but the exterior trim that framed my doorway entrance where the doorbell was previously mounted, had a very narrow (3/4") flat-spot, so the mount that came with my Ring Pro doorbell, was too wide and wouldn't mount flat... Perfect Buzzer made me a perfect fixed mount that attached perfectly to the Ring Pro and then to the narrow moulding on my house. Perfect Buzzer was even able to angle it 7.5 degrees to the left, with only a 1/4" extension from the building. Excellent communication with customer service via text with any questions that I had too!
Owner was very easy to work with - was able to talk by phone and text to meet our needs - perfect customer service. The mount was super easy to install and is the perfect solution to our sideways doorbell. Door clears the doorbell easily. Highly recommend this company!
Awesome product. Exactly what I was looking for. Fast shipping and easy to install.
BB
Bartlomiej B.
This extender works perfectly for me in my new condo. It shows everything I need, even with the stone wall blocking some of the view. (All I need is to the end of the sidewalk and coming into that.) Very happy. Great service with responsive text messaging. Recommend Hollie!
+ 2
JB
Jinks B.
I needed a 90 degree mount for my Ring Pro 2 Door Bell. All of the other ones I found online looked cheap and flimsy. This one works great and I was able to use Ring Doorbell angle bracket with this mount to give me my desired viewing angle. I would highly recommend this product.
B
Bp
Really helpful base! Exactly what it was needed to rotate 70 degrees the angle of my Logitech Circle View Doorbell. Didn’t know which plate I should buy so texted Rick a couple of pictures and he oriented me. Thanks!
J
Josh
Absolutely perfect. I was removing 2 older Ring Doorbell Pro's, so I ordered a customized a mounting plate + doorbell mount combo (so that I could just use the existing holes and wall anchors that were already in the stucco.) I can't believe this can be custom manufactured so perfectly, and install so easily, and adjust in every direction with plenty of wall-clearance. These (I purchased two) were well worth the price. They both installed really easily with the included screws, and they both look great. Camera angles are now locked in, and perfect. A really great product.
MM
Michael M.
Amazing store! They're filling a valuable niche product that the manufacturers' either didn't think of or didn't want to take the time to solve. This place has everything and the employees are super helpful! They walked me step-by-step through the process for my Amazon Ring Doorbell. Super patient with me. Also, they sell doorbell wire extensions--so remember to place it with your order because you might need it!
AC
Alex C.
Ricky was great in helping me select the correct mount for my new Ring 3 doorbell. The fixed mount worked great. We have an older home with a very narrow mounting space. This mount fit perfectly.
NP
Nancy P.
I found this product on Etsy. I find it unbelievable that Ring and the other smart doorbell makers don't have their own products to help people with more difficult installations for whatever reason. But, these products perfectly fit the bill! I was a little confused about what I needed and all communication between myself and Ricky was super quick and super helpful. Once I got the doorbell mount it fit absolutely perfectly and looks great! If you need one of these buy them here. You will not be disappointed!
TR
Troy R.
This what’s EXACTLY what I had for a design imagined in my head when I saw our original doorbell and wanted to put up our ring, couldn’t find anything like it anywhere! Thank you so much for making these, it’s PERFECT!!! Will recommend to anyone in need!!
JP
Jarod P.
This is what you need! I was able to get this extension mount to fit my brick entry perfectly for my ring 3+. My door jam was entirely too narrow for this specific model and PerfectBuzzer was the perfect solution!
Exactly what the world is looking for if you want to install a newly redesigned Ring floodlight came to an electrical box mounted under the sauphet of a house roof.
Very fast turn around time, fast shipping, however the mount didn't fit perfectly. I understand its 3D printed, but we had to secure the doorbell camera with double sided tape as well to make sure it didn't slip off. I did confirm before hand of the exact doorbell camera to make sure the mount worked, but it is serving its purpose Only reason its a 4 out of 5 instead :) Will shop here again!
Perfect customizable mount for my Ring Pro Doorbell. I wanted to use my existing doorbell wires, but the exterior trim that framed my doorway entrance where the doorbell was previously mounted, had a very narrow (3/4") flat-spot, so the mount that came with my Ring Pro doorbell, was too wide and wouldn't mount flat... Perfect Buzzer made me a perfect fixed mount that attached perfectly to the Ring Pro and then to the narrow moulding on my house. Perfect Buzzer was even able to angle it 7.5 degrees to the left, with only a 1/4" extension from the building. Excellent communication with customer service via text with any questions that I had too!
Owner was very easy to work with - was able to talk by phone and text to meet our needs - perfect customer service. The mount was super easy to install and is the perfect solution to our sideways doorbell. Door clears the doorbell easily. Highly recommend this company!
The Product Details state "Only fits Eufy Doorbells (except Dual Camera Models)", however the selectable "Doorbell Version" list includes a "Dual Camera Wired Version" option. Can you provide clarity as to whether the mount supports the Eufy wired S330?
Bryan
I made an adapter that can fit both. Eufy has too many models to have one for each.
The swivel mount at 90 degrees is from 1/4in to 3/4in from the wall depending on the width of the doorbell. The 0-35 degree mount is 1.5inches when at 0 degrees.
Lol. I’m not young but thanks for the kind words. I try to help every customer get exactly what they need.